+8613605213465
xztpj12100@163.com
audelo@163.com
audelo@163.com
High quality AUW 215i milling machine, new milling machine high efficiency
High quality AUW 215i milling machine, new milling machine high efficiency
| Engine | Manufacturer/Model | VOLVO/TAD1643VE-B |
| Power/Maximum speed | 565KW @2000 rpm | |
| milling rotor | Milling width (mm) | 2000/2200 |
| Milling depth *¹ (cm) | 0～33 | |
| Edge milling depth *¹ (cm) | 0 ～ 45 | |
| Milling rotor diameter (mm) | 1070 | |
| Milling rotor tip pitch (mm) | 18 | |
| box volume | Fuel Tank (L) | 1130 |
| Hydraulic Tank (L) | 220 | |
| Water tank (L) | 3000 | |
| run property | Travel speed (m/min) | 0~101 |
| Minimum milling turning radius (m) | 2 | |
| Track, front and rear (L × W × H) | 1850×300×665 | |
| (mm) | ||
| Receiving belt width (mm) | 850 | |
| Feed conveyor swing Angle (°) | 120 | |
| Material transport Feed system | Theoretical capacity (m /h) | 420 |
| Feed height (mm) | 4972 | |
| weight | Shipping weight (t) | 31.2 |
| Working weight (t) | 33.5 | |
| Maximum weight (t) | 35 | |
| Removable weight (optional) (t) | 1.5 |
| Wirtgen W 215 i country four cold milling machine technical parameters | |
| Model: | W 215i cold milling machine |
| engine | East Wind - Cummins X15 |
| Rated power, 2,200 RPM | 470 kW / 630 hp / 639 PS |
| Milling width | 2,000 mm |
| Milling depth | 0-330 mm |
| Fuel tank | 1,160 l |
| cistern | 3,280 l |
| Milling speed | 0-85 m/min |
| Travel speed | 5 km/h |
| Emission standard | Kokuni IV |
