+8613605213465
xztpj12100@163.com
audelo@163.com
audelo@163.com
AuW185 CFi cold milling machine
AuW185 CFi cold milling machine
| Technical parameters of AuW185 CFi cold milling machine | Technical parameters of Wirtgen W 185 CFi national four cold milling machine | |||||||
| engine | Manufacturer/Model | VOLVO/TAD1643VE | Model: | W 185 CFi cold milling machine | ||||
| Power/Maximum speed | 565KW @2000 rpm | engine | East Wind - Cummins L9 | |||||
| Let out | State stage 3 | Rated power, 2,200 RPM | 294 kW / 394 hp / 400 PS | |||||
| Milling width (mm) | 2000 | Milling width | 1,900 mm | |||||
| Milling depth (cm) | 0～33 | Milling depth | 0-330 mm | |||||
| Edge milling depth (cm) | 0 ～ 45 | Fuel tank | 750 l | |||||
| Milling rotor diameter (mm) | 1070 | cistern | 2,250 l | |||||
| Milled rotor | Rotor cutter spacing (mm) | 18 | Milling speed | 0-40 m/min | ||||
| Fuel Tank (L) | 1130 | Travel speed | 7.5 km/h | |||||
| Hydraulic Tank (L) | 220 | Emission standard | Kokuni IV | |||||
| Box volume | Water tank (L) | 3000 | ||||||
| Travel speed (m/min) | 0 ～ 88 | |||||||
| Driving performance | Minimum milling turning radius (m) | 2 | ||||||
| Track assembly | Track, front and rear (L × W × H)(mm) | 1850×300×665 | ||||||
| Receiving belt width (mm) | 850 | |||||||
| Feed conveyor swing Angle (°) | 120 | |||||||
| Theoretical capacity (m /h) | 420 | |||||||
| Material handling system | Feed height (mm) | 4900 | ||||||
| Shipping weight (t) | 31.5 | |||||||
| Working weight (t) | 33.5 | |||||||
| Maximum weight (t) | 35.5 | |||||||
| weight | Removable configuration (optional) (t) | 1.5 |
